Installing MyVestaCP under NAT - LXC

Post Reply
puma2001
Posts: 3
Joined: Sat Dec 19, 2020 5:11 pm

Hi guys, my name is Andrei and i'm having a problem . I'm trying to install MyVestaCP under a NAT connection, I'm in Romania.
I'm working with LXC Container in Proxmox VE, and when i'm installing it at 90% it hags, it can't connect to any hosts to download any other installation packages . Also i don't have any ping connection from the machine to the internet. it's like the firewall was turned on and rejects all traffic in and out.

I don't get it, I've used VestaCP , the original Control Panel, and it worked perfectly with no problem . I need it for a personal cloud, and for testing,
so i'm quite fond of the software, because i really need it .

Is there any limitations regarding the instalation of MyVestaCP under a NAT ? are there any tricks to make a smooth install ?
I've also tried to disable the iptables at install, but it makes the same install and crashes .

If you have any ideas, please share them !
User avatar
myVesta
Site Admin
Posts: 928
Joined: Fri Jun 19, 2020 9:59 am
Has thanked: 8 times
Been thanked: 6 times

puma2001
Posts: 3
Joined: Sat Dec 19, 2020 5:11 pm

dpeca wrote: Sun Dec 20, 2020 6:27 pm Maybe this help: https://github.com/myvesta/vesta/issues/99
Thanks a lot, then i will use the solution in that thread !
cheers !
User avatar
myVesta
Site Admin
Posts: 928
Joined: Fri Jun 19, 2020 9:59 am
Has thanked: 8 times
Been thanked: 6 times

Please leave feedback did it solved the problem.
puma2001
Posts: 3
Joined: Sat Dec 19, 2020 5:11 pm

dpeca wrote: Sun Dec 20, 2020 9:49 pm Please leave feedback did it solved the problem.
It solved my problem. Thanks !
User avatar
myVesta
Site Admin
Posts: 928
Joined: Fri Jun 19, 2020 9:59 am
Has thanked: 8 times
Been thanked: 6 times

ok, fix is implemented in official repo - https://github.com/myvesta/vesta/commit ... 15ff208a2e
will be pushed in next update (new installs has a fix from this moment)
Post Reply